Useful things. Made with intent.

Dobinsons IMS Suspension Kit - 2.5" Lift

Dobinsons IMS Monotube Suspension Lift Kit for KZJ7x/LJ7x

1.5" Lift Rear Coil Springs - Up to 110 lb load - No factory rake / 2.5" Lift Rear Coil Springs - Up to 110 lb load · Teal / Black

Dobinsons GS Suspension Kit - 2.5" Lift

Dobinsons GS Twin Tube Suspension Lift Kit for KZJ7x/LJ7x

1.5" Lift Rear Coil Springs - Up to 110 lb load - No factory rake / 2.5" Lift Rear Coil Springs - Up to 110 lb load · Teal / Black

Dobinsons 2.6" IMS Monotube Shock Pair (KZJ7x/LJ7x Front)

Dobinsons 2.6" IMS Monotube Shock - IMS59-60634

Dobinsons 2.6" IMS Monotube Shock Pair (KZJ7x/LJ7x Rear)

Dobinsons 2.6" IMS Monotube Shock - IMS59-60633

Dobinsons Coil Spring Pair (KZJ7x/LJ7x Front)

Dobinsons Coil Spring Pair - 2.5" Lift up to 110 lb Load (C59-244)

Dobinsons Coil Spring Pair (KZJ7x/LJ7x Rear)

Dobinsons Coil Spring Pair (C59-247/289)

1.5" Lift Rear Coil Springs - Up to 110 lb load - No factory rake (C59-289) / 2.5" Lift Rear Coil Springs - Up to 110 lb load (C59-247) / Stock Height Rear Coil Springs - Stock Load (C59-291) · Teal / Black

Dobinsons Rubber 2.5 Degree Caster Correction Bushing Kit

Dobinsons Rubber 2.5 Degree Caster Correction Bushing Kit - 4 Bushings per kit (RB59-522K)

Dobinsons Steering Damper

Dobinsons Steering Damper (SD59-824)

Caster Correction Radius Arms - Toyota Land Cruiser LJ7x, KZJ7x

WHY

Land Cruiser parts

Sway Bar Drop Bracket - KZJ7x Rear

Pair of laser cut and CNC bent stainless steel rear sway bar drop links for KZJ7x Toyota Land Cruisers. These brackets have a drop setting of 2” and 3” that will help increase the effectiveness of your sway bar on the road and prevent your sway bar links from binding against…

Suspension

Toyota 1KZ EGR Blockoff Plates

These laser cut 316 stainless blockoff plates are the highest quality parts available on the market, 0.250” thick and finished to perfection they will stand the test of time and never leak on you or corrode.

Front Sway Bar Spacers

Addon to caster arm kit, sometimes necessary to prevent contact between front driveshaft and sway bar at full droop. Spacers come in half inch increments and can be stacked as high as you need. Two spacers is common so these are sold as a set of four, two for each side.…

Suspension

BMW E46 330 & E36 M3 ARP Press In Stud Hubs

These are a set of four hubs, two SKF front bearings and two quality rear aftermarket hubs modified for ARP press in studs. These will work with up to a 15mm spacer with most wheels and have a bullet nose for easy lug nut threading. SE46 legal!

Brakes

Alfa Split Case Gearbox Detent Holder

Laser cut 3/16” thick stainless steel detent cup retainer plate with new hardware. We all know how bent the original plates get over time loosening the spring tension on the shift detents and causing a loose shifter feel. These plates will never bend or corrode and include…

85mm BMW Rear Wheel Bearing Tool

This is a custom made tool specifically to fit BMW 85mm rear wheel bearings found on E36 M3, E46 330, E46 M3, as well as some 7 series, most older 8 series, and all Z roadster/coupe M models.

BMW E36 E46 Press-In Stud Conversion

Set of 4 Motorsport grade press-in ARP studs in quality BMW hubs. Never have a threaded stud conversion back out on you again. Front bearings are SKF which replace the inner metal dust seal with a rubber ring for lower friction and better protection.

BMW E36 E46 Double Drilled Hubs

CNC machined 5x120 5x114.3 rear hubs and front wheel bearings for models listed below. We start with SKF front bearings and quality hubs and machine the 5x114.3 holes with M12x1.5 threads. SKF front bearings use a rubber sealing ring instead of the metal inner dust cover for…

Brakes

BMW E36 M3 Double Drilled Hubs

CNC machined 5x120 5x114.3 rear hubs and front wheel bearings for BMW E36 M3 only. We start with SKF front bearings and quality hubs and machine the 5x114.3 holes with M12x1.5 threads.

Brakes

Rotor Drilling Service Add-On

This add-on is a required purchase for our shop to drill customer-provided rotors for our double drilled hub kits.

Brakes

Dobinsons Front Leaf Spring - 6 Leaf pack(60 Series)

Dobinsons Front Leaf Spring (HJ61-6L-F)

Dobinsons Front Leaf Spring - 7 leaf pack (60 series)

Dobinsons Front Leaf Spring (HJ61-7L-F)

Dobinsons 2.2" IMS Monotube Shock Pair (60 Series Front)

Dobinsons 2.2" IMS Monotube Shock Pair (IMS59-50701)

Dobinsons 2.2" IMS Monotube Shock Pair (60 Series Rear)

Dobinsons 2.2" IMS Monotube Shock Pair (IMS59-50649)